Before use this tutorial first read all tutorial carefully after following step by step and any problem using this tutorial then leave comment on below comment box i will soon good reply with also remember before use this tutorial also check device in hardware if hardware issue in device and try to flash using this tutorial then your device will be dead or other issue so first check in hardware after try in flash tutorial when device customer take this device for software then in hang issue so i use below firmware or flash tool so i was success and problem was solve of hang on solution but remember not only hang on logo solution but your device if restarting issue, hang issue then you can use this tutorial please carefully use this tutorial and read below description about firmware.

This flash file tested by me without any error working well,  you can use this flash file when your device hang on logo problem, restarting problem, security lock problem, password lock problem, pattern lock problem etc software related problem and you can use this tutorial without any box and this is free for all who know about software in mobile, impotent for flashing first must check your micro usb cable if not good then you can't flash it so check micro usb cable second check your device battery that is impotent for flashing if your device battery low so stop your device between flash so this is impotent for flash, before you flash save your data like contact, photos, videos etc because this is factory flash file so you can't save after full flash so must remember all are impotent notes.

Download Link
Micromax A082 Stock ROM Firmware Download here
SP_Flash_Tool_v5.1343.01 Flash tool Download here
Micromax A082 USB Driver Download here

Required for flash:

1. Micromax Bolt A082 device with good battery charged
2. Micromax Bolt A082 tested firmware
3. SP_Flash_Tool_v5.1343.01 Flash tool
4. Micro usb cable
6. Computer or Laptop

Procedure:

1. Download tested firmware from above link (if link not working just leave your comment on below comment box)
2. Extract to both files into desktop or as you like path (must be installed winrar software in your computer)
3. Open SP_Flash_Tool_v5.1343.01 folder and choose flash_tool.exe file and open it
4. Click on Scatter-loading button and choose MT6572_Android_scatter.txt file
5. Now click on Download button
6. Press and hold Volume UP button and insert usb cable
7. Wait until driver install, if driver installed in your computer then download start automatically into device
8. Wait until full install (do not try in unplug while your device in flashing mode)
9. Congratulation you are done

Micromax Bolt A082 Flash done with SP flash tool screenshot;

Micromax Bolt A082 Flash done with SP flash tool Video HERE

Post a Comment