Since many of us use Windows in our hobby, I thought these notes might be helpful to someone. These tips should work on various computers.
HP21-2010 All-in-One Touch (HP AMD-based quad-core with Radeon-R3 graphics)
- ESC on boot for Post-Menu (BIOS and UEFI Diags)
This is not my main computer but I do use it. While I usually prefer "clean-installs" there is something to be said for easier overlay-installs (if they work). With broadband and more of a cloud focus, I am becoming more trusting of it. However, research of my problem lead to cause being that it was initially upgraded by overlay (aka in-place upgrade) from Windows 8.1.
(8-2014) Came with Windows 8.1. Using Microsoft Account login and Outlook.com email and cloud.
(9-2015) I verified with HP that this model was eligible, so I answered Microsoft's offer and online upgraded (by overlay) to Win-10 from WindowsUpdate soon after its release. No data or pre-installed apps were lost and this computer has been working fine since.
I also installed HP Support Assistant . It's a nice updater for HP drivers and Apps. (It updates itself from it's own separate "About" prompt.)
(1-2016) Threshold-2 Upgrade
Computer has been working fine.
WindowsUpdate tried to "Upgrade to Windows 10 Home. version 1511,10586" (aka "Threshold-2") but Failed Auto-Install several times (as revealed in logs).
Hard-drive Error-check reveals no problems.
For all these procedures, start CommandPrompt as Admin and stay connected to Internet.
Start Version CommandPrompt> ver = 10.0.10240
CommandPrompt> SFC /scannow
- Says it found UN-REPAIRABLE errors
I think options at this point are to try DISM or re-install (Overlay or Clean) from full Win10 .ISO (on flash drive)
CommandPrompt> dism.exe /online /cleanup-image /restorehealth
- Says it found UN-REPAIRABLE errors
- HOWEVER, I left PC for a while. Upon return I found that the Auto-Upgrade had started itself again and appeared to be working.
- Win10 (Threshold-2, 1511, 10586) install took about 2 hours (over WiFi) but worked fine. No apps or data-files were erased.
Now Version CommandPrompt says> ver = 10.0.10586
CommandPrompt> SFC /scannow
- SFC PASSES NOW
HP Support Assistant - Installed suggested driver updates - Now Current
WindowsUpdate - Installed suggested software updates - Now Current
- WindowsUpdate History resets and starts-over now (after Threshold-2 update was installed)
Computer working fine with latest version of Windows 10 Home (64bit).
Dell Venue Pro 8345 Tablet (Intel Atom and 32gb SSD ... initially shipped with Windows-8)
- Hold Power & Down-Volume from Power-On to access BIOS.
This machine was also suffering from multiple failed long auto-update (on it's own) Windows-10 upgrade attempts.
The main problems preventing the upgrade were:
1. Lack of "work space" on small SSD/flash memory (about 4gb) . This was compounded by the fact that Dell Backup and Restore (DBaR) was using a good portion (10 gb) of the available space for a Windows-8 Recovery Partition.
2. I installed the recommended (for Win-10 support) BIOS upgrade before attempting it again.
3. Current Win-8 WiFi driver seemed to be having a problem staying connected long enough for the large download installer download. Updated to latest version.
Then, I installed a SD-card in tablet and let Windows use that for Windows-10 Undo Files (these can be deleted later). The upgrade to Windows-10 finally completed successfully.
Dell Backup and Restore (DBaR) can then be uninstalled. It's not supported under Windows-10 anyway ( you now use Microsoft bundled backup tools). After reboot, if DBar's (old Win-8) recovery partition is still there, you can manually remove it. New free space on C: is 14gb.
Nice tablet. Might be a good way to run full Windows MissionPlanner in the field.
إرسال تعليق