Samsung Galaxy Grand GT-I9082 DUOS Flash done with flash tool

Must Read:

This flash file tested by me without any error working well,  you can use this flash file when your device hang on logo problem, restarting problem, security lock problem, password lock problem, pattern lock problem etc software related problem and you can use this tutorial without any box and this is free for all who know about software in mobile, impotent for flashing first must check your micro usb cable if not good then you can't flash it so check micro usb cable second check your device battery that is impotent for flashing if your device battery low so stop your device between flash so this is impotent for flash, before you flash save your data like contact, photos, videos etc because this is factory flash file so you can't save after full flash so must remember all are impotent notes.

Download Link

(Without any Password) I9082XXUBMJ4_OLBBMJ2 Download here

Odin3_v1.85 Download here

Required for flash:

1. Samsung Galaxy Grand GT-I9082 DUOS device with good battery charged

2. Samsung Galaxy Grand GT-I9082 DUOS tested firmware

3. Odin3_v1.85 flash tool

4. Micro usb cable

5. Computer or Laptop

Procedure:

1. Download tested firmware or flash tool from above link (if link not working just write down comment on below comment box)

2. Extract to both files into desktop or as you like path (must be installed winrar software in your computer or laptop)

3. Go to Extract folder and choose Odin3_v1.85 folder and choose Odin3 v1.85 file and open it

4. 4. Click on Bootloader button and choose BOOT_I9082DXEBMI1_REV05.tar.md5 file

5. Click on PDA button and choose CODE_I9082XXUBMJ4_1341826_REV05_user_low_ship.tar.md5 file
6. Click on Phone button and choose MODEM_I9082DXEBMI1_REV05.tar.md5 file
7. Click on CSC button and choose CSC_OLB_I9082OLBBMJ2_1341826_REV05_user_low_ship.tar.md5 file
8. Now Turn off device if device on condition
9. Press and hold Volume Down + Home + Power button and press Volume Up button for Download Mode and insert usb cable

10. Wait until driver install, if driver installed in your computer or laptop then show device connected in odin tool

11. Now Click on Start button and then wait until full flash process (do not disconnect while flashing process)

12. You are done

Samsung GT-I9082 Flash done with flash tool screenshot:

Samsung GT-I9082 Flash done with flash tool video: