This flash file tested by me without any error working well, you can use this flash file when your device hang on logo problem, restarting problem, security lock problem, password lock problem, pattern lock problem etc software related problem and you can use this tutorial without any box and this is free for all who know about software in mobile, impotent for flashing first must check your micro usb cable if not good then you can't flash it so check micro usb cable second check your device battery that is impotent for flashing if your device battery low so stop your device between flash so this is impotent for flash, before you flash save your data like contact, photos, videos etc because this is factory flash file so you can't save after full flash so must remember all are impotent notes.
Download Link
Micromax X222 V4_160113_HW1.4 SWV22 Download here
FlashTool_UI_exe_v5.1120.00 Download here
Required for flash:
1. Micromax X222 phone with good battery charged
2. Micromax X222 tested flash file or flash tool
3. Micro usb cable
4. Computer or Laptop
Procedure:
1. Take tested flash file or flash tool from above link (if link not working just write down comment on below comment box)
2. Extract to both zip file to desktop or as you like path (must be installed winrar software in your computer or laptop)
3. Open FlashTool_UI_exe_v5.1120.00 folder and choose flash_tool.exe file and open it
4. Click on Scatter/Config File button and choose scatTINNO52_10A_GEMINI64.txt file from firmware folder
5. Now click on Download button
6. Press and hold Center key and insert usb cable (must be working well center key in device)
7. Wait until driver install, if driver installed in your computer or laptop then device automatically detect to flash tool and starting flash
8. Wait until full flash (do not disconnect while flashing)
9. You are done
Micromax X222 flash done with flash tool Screenshot:
Micromax X222 flash done with flash tool video:
إرسال تعليق