This flash file tested by me without any error working well, you can use this flash file when your device hang on logo problem, restarting problem, security lock problem, password lock problem, pattern lock problem etc software related problem and you can use this tutorial without any box and this is free for all who know about software in mobile, impotent for flashing first must check your micro usb cable if not good then you can't flash it so check micro usb cable second check your device battery that is impotent for flashing if your device battery low so stop your device between flash so this is impotent for flash, before you flash save your data like contact, photos, videos etc because this is factory flash file so you can't save after full flash so must remember all are impotent notes.
Download Link
Intex Aqua Life II firmware or flash tool download from here
Required for flash:
1. Intex Aqua Life II device with good battery charged
2. Intex Aqua Life II tested firmware or flash tool
3. Micro usb cable
4. Computer or Laptop
Procedure:
1. Take of all needed for flashing device from above link (if link not working then write down comment on below box)
2. Extract to desktop or as you like path (must installed winrar software in computer or laptop)
3. Open SPD Upgrade Tool vR2.9.9015 folder and choose UpgradeDownload.exe file and open it
4. Click on Firmware button (button like setting) and choose SC7731_V120_KEW_281_V1.9_150624.pac file from Firmware folder
5. Now Click on Start button (button like Play)
6. Press and hold Volume Down key and insert usb cable (must be working well micro usb cable or device key)
7. Wait until driver install, if driver installed in your computer or laptop then downloading automatically start in to device
8. Wait until full install (note : do not disconnect device while flashing)
9. You are done
Intex Aqua Life II Flash done with flash tool screenshot:
Intex Aqua Life II Flash done with flash tool video :
Post a Comment