Intex Cloud G Flash done with flash tool
This flash file tested by me without any error working well, you can use this flash file when your device hang on logo problem, restarting problem, security lock problem, password lock problem, pattern lock problem etc software related problem and you can use this tutorial without any box and this is free for all who know about software in mobile, impotent for flashing first must check your micro usb cable if not good then you can't flash it so check micro usb cable second check your device battery that is impotent for flashing if your device battery low so stop your device between flash so this is impotent for flash, before you flash save your data like contact, photos, videos etc because this is factory flash file so you can't save after full flash so must remember all are impotent notes.
Intex_Cloud_G_V02_Indian_SER Firmware Download here
Required for flash:
1. Intex Cloud G device with battery charged
2. Intex Cloud G Tested firmware or tool
3. Micro usb cable
4. Computer or Laptop
Procedure:
1. Download Firmware or tool from above link
2. Open SPD Upgrade Tool v2.9.8004 tool
3. Click on Firmware button and choose Intex_Cloud G_V02_Indian_SER.pac file
4. Click on Start Download button
5. Press and Hold boot key and insert usb cable
6. Wait until full flash
7. You are done
Intex Cloud G Flash done screenshot:
إرسال تعليق