Here's a little trick I always use when recording bass guitar in a DAW : doubling the track, with a LPF on one and HPF on the other, both separated by a crossover around 250 hz. This way I can add drive on the HPF channel while keeping solid bass frequencies on the other - because the more drive you add, the more low frequencies you lose.
For this video I used an Ibanez with 3+ years old strings, they're almost dead so with new strings tweaking will be necessary.
Preset on AxeChange :
http://axechange.fractalaudio.com/detail.php?preset=678
Tweak to your linking !
Note : HPF = High pass filter, LPF = Low pass filter
Edit 26/09 : There's a demo of a newer version of the preset on soundcloud, I replaced the crossover blocks by filters, and I control the crossover frequency with an expression pedal :
http://soundcloud.com/thib-de-rob/bass-dual-amp-demo
Tweaking a dual amp bass preset
You might like
Semua Tentang BlackBerry, OS, Aplikasi Offline, Cara Flashing, Dan Lainnya Secara Lengkap
Bismillahirrohmanirrohim...Assalamu'alaikum Warrohmatullohi Wabarokatuh...Selam…
byAll Firmware Download-
Micromax Canvas A1 AQ4501 Dead After Flash Solution (tested)
Micromax Canvas AQ4501 Dead After Flash the Experience was with me, after that …
byAll Firmware Download-
Unbelievable Monkey stolen a bundle of Rs.10,000 cash
Monkey enters into jewelry shop in Guntur, Andhra Pradesh, and jumped on a work…
byAll Firmware Download-
Post a Comment