DZ09
Intro
Specification:
DISCLAIMER
FLASH WITH YOUR OWN RISK!!!
I WILL NOT BE RESPONSIBLE FOR ANY NON FUNCTIONAL AND DAMAGES TO YOUR DEVICE HARDWARE AND SOFTWARE
Preparation:
What you need before start
- PC or laptop (windows)
- USB cable
- Driver
- Flashtool
- Firmware (rom)
- Serial Number Writer Tool (for those who are lost imei number)
Getting started
1. On phone dialer press *#8375#
2. Write down all version summary info and keep it save for future reference
3. Write down your imei number by pressing *#06# and keep it save for imei recovery
Installing Driver
1.On your computer install com port driver for your DZ09 (come with flash tool download above)
2. Open your computer device manager
3. Turn off your DZ09 before connect to the PC via USB cable
4. Connect USB cable
5. Wait till computer installing new com port
6. If it fail to install due to device auto disconnect, disconnect USB cable from device. Run Flashtool.exe
7. Press Download Agent button, and load file MTK_AllInOne_DA.bin
8. Go to Memory Test tab and check RAM test only. Press start
9. Connect USB cable to device and wait till the pc installing the port automatically.
10. After success installing driver Flashtool will test your ram. Wait till circle green popup. Then disconnect your device. This method is used for holding the port while windows working for driver installation.
Now the driver is already for flashing process.
Firmware Preparation
For firmware i just only need English language. Other language maybe not available. On listed below main language for those firmware was English and Chinese. Otherwise I did`t check yet. And all I already test with my own DZ09. There are many type and version on this model, I tested all and below are the suitable for my DZ09 hardware
DZ09 Firmware
APLUS firmware (only secret code did`t work)
GT08 firmware (only camera issue)
MORE - More version (Latest uploaded 02 Mar 2016)
 |
| DZ09 |
 |
| APLUS |
 |
| GT08 |
Firmware installation
1. Power off your DZ09
2. Open Flashtool.exe
3. On Download tab, hit Download Agent and open MTK_AllInOne_DA.bin
4. Hit Scatter/Config File and load .cfg file inside firmware folder
5. Select Options, make sure you tick "backup->Download/Format->Restore" on Backup and Restore tab
6. Hit download button
7. Connect USB cable to your device
8. Wait for backup, install and restore process done till GREEN CIRCLE appear. It will take up to 5min to complete all the process. PLEASE DO NOT DISCONNECT THE USB CABLE DURING THE PROCESS TILL IT DONE. IF NOT IT WILL HARD BRICK YOUR DEVICE!!!!
9. Disconnect your USB cable
10. Done, start your smart watch as usual and enjoy
RECOVERING YOUR LOST IMEI
If "no network" state happen to your device even your sim card inserted with a good network coverage area, that mean you may have lost IMEI number. Press *#06# to check. If did`t show your IMEI you need to restore your IMEI by using Serial Number Writer Tool.
How to recover:
- Download serial number writer tool here.Then extract the file.
- Run SN Writer.exe
- Change target type to FEATURE PHONE
- Hit System Config
- Tick IMEI checkbox and hit MD1_DB
- Select BPL file. BPL file is located in your same firmware folder
- Open BPL file then hit save
- Turn off your device.
- Hit Start button and key in your IMEI number that you have write down before or you can find it under the battery cover. Press OK
- Wait till the status below the progress bar in "Wait for USB insert" state
- Connect USB cable to your device
- Wait the process done till GREEN PASS
- DONE, hit Cancel then quit the tool.
- Turn on your DZ09 device then check with *#06# code on your phone dailer.
APPS for notification push
You can download here for APK file. Download and install, before install make sure you already checked Unknown sources checkbox in the security setting of your phone. OR scan QR code below with your phone for direct link download to your phone
إرسال تعليق