Intex Aqua i6 Flash done with flash tool


Must Read:
This flash file tested by me without any error working well,  you can use this flash file when your device hang on logo problem, restarting problem, security lock problem, password lock problem, pattern lock problem etc software related problem and you can use this tutorial without any box and this is free for all who know about software in mobile, impotent for flashing first must check your micro usb cable if not good then you can't flash it so check micro usb cable second check your device battery that is impotent for flashing if your device battery low so stop your device between flash so this is impotent for flash, before you flash save your data like contact, photos, videos etc because this is factory flash file so you can't save after full flash so must remember all are impotent notes.

Download Link

Intex Aqua i6 v.08 Download HERE

Intex Aqua i6 v.13 Download HERE

Required for Flash:

1. Intex Aqua i6 device with battery charged
2. Intex Aqua i6 tested firmware with tool
3. Micro usb cable
4. Computer or Laptop

Procedure:

1. Download flash file from above link
2. Extract to desktop or as you like path
3. Take out your device battery
4. Insert battery in device
5. Open flash tool and Click on Scatter button and choose MT6582_Android_scatter file
6. Click on Download button
7. Press and Hold Volume Up key and insert usb cable
8. Wait until full flash
9. You are done
Intex Aqua i6 full flash done screenshot:


Post a Comment