Most of BM623m user downgrade their firmware to BM622m 2012 firm
ware .It easy change mac and WiFi Access or WLAN still working .
However by downgrading to old firmware if you generate admin password via genpasstool with serial and mac Error Login appear. You don't know if the default admin user and password are change.
Default user is accessible but admin is not.
There are customize firmware available then people use it without knowing what is the Admin User and Password.
How to Fix :
1. Telnet must be enable , do the step below if your telnet is not open.
Command
3. Now log in as user: admin password :admin
You might also like:
How to Enable Windows Telnet
ware .It easy change mac and WiFi Access or WLAN still working .
However by downgrading to old firmware if you generate admin password via genpasstool with serial and mac Error Login appear. You don't know if the default admin user and password are change.
Default user is accessible but admin is not.
There are customize firmware available then people use it without knowing what is the Admin User and Password.
1. Telnet must be enable , do the step below if your telnet is not open.
- Login as user password 0SlO051O
- Open this link on a new tab http://192.168.254.1/advanced/acl.html
- Check the LAN Telnet and click apply
Command
- User: Firefly
- Pass:$P4mb1h1r4N4m4nT0!!
- Type : "cd /etc " without quotes Press Enter
- Type : "cp pbi_passwd pbi.bakf " without quotes Press Enter
- Type : "cat > pbi_passwd " without quotes Press Enter
- Type : "admin:0M4K4SrtZDwFC7Nh" without quotes Press Enter
- Type : " ^D " without quotes Press Enter
- Type : " exit " without quotes Press Enter 2x
3. Now log in as user: admin password :admin
You might also like:
How to Enable Windows Telnet
Post a Comment